Technology
Scrapped iron pieces create a peerless pendant.
- 2022-12-01 13:16:34
-
Scrapped iron pieces create a peerless pendant.
The craftsman first puts the red-hot iron piece on the bench vise, and beats it continuously until it forms the same arc as the drawing, and then continues to fix it on the bench vise, and performs a series of grinding and polishing treatments until the polished one is shining. Then paste the drawing on the blade body and put it on the belt sander to grind out the corresponding radian, then saw the corresponding blade body with a jigsaw, and then burn it with a spray gun, Then put it in oil for quenching processing, after cooling, continue to put it on the firewood tongs to manually polish off the residue on the surface, then polish it with sandpaper, and put it aside for later use.Then find some broken silver and put it into a quartz dry pot, use a spray gun to burn continuously until it becomes liquid, pour it into a mold and let it cool, take out the model, continue to put it into a tablet machine and turn it over and over again until it is pressed Make it into a thin sheet, and then put the pre-drawn and trimmed drawings on it, saw the corresponding shape with a saw, and then put the remaining silver sheet in the tablet machine again to press into a long sheet, and paste two sheets of the same Using the same drawing, use a jigsaw to cut out the corresponding pattern, then use a big fire to burn off the paper on the surface, put welding wire on it, and weld the other two pieces of silver together. Then the craftsman drew a detailed pattern on it with a marker pen. Can you guess what the craftsman made? You can communicate in the comment area.
As the saying goes, good chopping of wood is not a mistake in sharpening knives. Of course, good things need superb craftsmen. The master craftsman fixed the silver piece and welded a buckle on the top. After welding, put it aside for later use.Then take out the scabbard drawing prepared in advance, paste it on the silver sheet, use a jigsaw to pull out the corresponding pattern, punch some small holes in the middle, and then use the jigsaw to continue sawing out the small lines in the middle, and you will get a hollow knife The sheath is placed on a wooden pier and hammered continuously with a hammer to forge a curved groove, and then the two pieces are pried together and welded together with welding wire.Insert the blade and scabbard. After some dazzling polishing, the main parts are almost finished. Finally, put some sulfur powder in the spoon, heat it into a liquid, and then brush some liquid on the parts with a brush. After some grinding and polishing, and finally assembling all the accessories together, such a Domineering Pendant is complete. Does a pendant with a cool shape surprise you? If you make an offer, how much do you think it's worth?
- Previous [Return Home] [Print] [Go Back] Next
Products Search
