Exquisite Coin Pendant by the master

The craftsmanship of this master is so amazing that he actually sawed the Coin in half and refitted it into such an Exquisite Pendant. Let's take a look at the production process. First, draw a positioning line on the side of the coin, and then draw a circle around the Coin. Then use a saw to saw down from the positioning line. I have to say that this craft is absolutely impossible to do within 30 years.

After sawing the Coin, sand it smooth with sandpaper, then heat the coin to reduce its hardness, and then put it in water. Cool quickly, put the coin into the sunken wooden pier, beat it repeatedly with a wooden hammer, so that you can get two Convex Coins, put the coin on the copper plate, draw a marking line, and saw a circle along the marking line Shaped copper plate, make a small hole on the copper plate, cut out the extra part of the interior along this small hole, continue to grind and polish the edge, it fits Perfectly with the Coin, insert a small piece of metal, start high temperature baking, the metal has melted, At this time, the coin and the copper plate are completely firm.

Use special glue to stick the two pieces of coins together. Cut out a small piece of copper and put it into the groove, insert it into a metal rod and beat it. The copper piece becomes a copper tube. Bake and cool, pull it. Now we need to saw a groove on the coin, saw the copper pipe just now into multiple sections and penetrate the wire, then insert the coin into the groove, continue to bake at high temperature, then put it in water to cool, and then put The excess part is sawed off, polished repeatedly, drilled a hole, inserted into the fixed metal, baked at high temperature, cooled in water and polished smooth, inserted a small piece of metal into the side of the coin, baked at high temperature to fix it, and opened a hole at the corresponding position below.

Until it is perfectly closed, now make a hanging ring for the Pendant, finally wash it, sand it smooth with sandpaper, and then do a mirror polish. The final product seems to be like a work of art.